Nema 23 (57mm) titi-lupu stepper Motors
>> Awọn apejuwe kukuru
| Motor Iru | Bipolar stepper |
| Igun Igbesẹ | 1.8° |
| Foliteji (V) | 2.6 / 3.6 / 4.1 |
| Lọwọlọwọ (A) | 3/4/5 |
| Atako (Ohms) | 0.86 / 0.9 / 0.81 |
| Inductance (mH) | 2.6 / 4.5 / 4.6 |
| Awọn onirin asiwaju | 4 |
| Idaduro Torque (Nm) | 1 / 1.8 / 3 |
| Gigun Mọto (mm) | 55/75/112 |
| kooduopo | 1000CPR |
| Ibaramu otutu | -20 ℃ ~ +50 ℃ |
| Iwọn otutu Dide | 80K ti o pọju. |
| Dielectric Agbara | Iye ti o ga julọ ti 1mA.@ 500V, 1KHz, 1Sec. |
| Idabobo Resistance | 100MΩ Min.@500Vdc |
>> Awọn apejuwe
Pṣiṣe
Agbara fifuye nla, iwọn otutu kekere, gbigbọn kekere, ariwo kekere, iyara iyara, esi iyara, iṣiṣẹ didan, igbesi aye gigun, deede ipo giga (to ± 0.005mm)
Aohun elo
Ohun elo iwadii iṣoogun, awọn ohun elo imọ-aye, awọn roboti, ohun elo laser, awọn ohun elo itupalẹ, ohun elo semikondokito, ohun elo iṣelọpọ itanna, ohun elo adaṣe adaṣe ti kii ṣe deede ati awọn oriṣi ohun elo adaṣe
>> Awọn iwe-ẹri
>> Itanna paramita
| Motor Iwon | Foliteji/ Ipele (V) | Lọwọlọwọ/ Ipele (A) | Atako/ Ipele (Ω) | Inductance/ Ipele (mH) | Nọmba ti Awọn onirin asiwaju | Rotor Inertia (g.cm2) | Idaduro Torque (Nm) | Gigun mọto L (mm) |
| 57 | 2.6 | 3 | 0.86 | 2.6 | 4 | 300 | 1 | 55 |
| 57 | 3.6 | 4 | 0.9 | 4.5 | 4 | 480 | 1.8 | 75 |
| 57 | 4.1 | 5 | 0.81 | 4.6 | 4 | 800 | 3 | 112 |
>> Gbogbogbo imọ paramita
| radial kiliaransi | O pọju 0.02mm (ẹrù 450g) | Idaabobo idabobo | 100MΩ @ 500VDC |
| Imukuro axial | O pọju 0.08mm (ẹrù 450g) | Dielectric agbara | 500VAC, 1mA, 1s @ 1KHZ |
| Max radial fifuye | 70N (20mm lati ilẹ flange) | kilasi idabobo | Kilasi B (80K) |
| Iwọn axial ti o pọju | 15N | Ibaramu otutu | -20 ℃ ~ +50 ℃ |
>> 57IHS2XX-X-4A iyaworan ilana motor
| Iṣeto PIN (Iyatọ) | ||
| Pin | Apejuwe | Àwọ̀ |
| 1 | +5V | Pupa |
| 2 | GND | funfun |
| 3 | A+ | Dudu |
| 4 | A- | Buluu |
| 5 | B+ | Yellow |
| 6 | B- | Alawọ ewe |
