Nema 24 (60mm) stepper motor
>> Awọn apejuwe kukuru
| Motor Iru | Bipolar stepper |
| Igun Igbesẹ | 1.8° |
| Foliteji (V) | 2.1 / 2.9 / 3.2 / 3.7 / 4.1 |
| Lọwọlọwọ (A) | 5 |
| Atako (Ohms) | 0.42 / 0.57 / 0.64 / 0.74 / 0.81 |
| Inductance (mH) | 1.3 / 1.98 / 2.3 / 2.83 / 3.23 |
| Awọn onirin asiwaju | 4 |
| Idaduro Torque (Nm) | 1.5 / 2.5 / 3 / 3.5 / 4 |
| Gigun Mọto (mm) | 55/75/84/100/112 |
| Ibaramu otutu | -20 ℃ ~ +50 ℃ |
| Iwọn otutu Dide | 80K ti o pọju. |
| Dielectric Agbara | Iye ti o ga julọ ti 1mA.@ 500V, 1KHz, 1Sec. |
| Idabobo Resistance | 100MΩ Min.@500Vdc |
Iwọn
20mm, 28mm, 35mm, 42mm, 57mm, 60mm, 86mm
Stepper Igun
1.8°, 0.9°
Pṣiṣe
Iyipo ti o pọju titi de 6N.m, iwọn otutu kekere, gbigbọn kekere, ariwo kekere, igbesi aye gigun (to 5 milionu awọn iyipo).
Aohun elo
Ohun elo iwadii iṣoogun, awọn ohun elo imọ-jinlẹ igbesi aye, awọn roboti, ohun elo laser, awọn ohun elo itupalẹ, ohun elo semikondokito, ohun elo iṣelọpọ itanna, ohun elo adaṣe adaṣe ti kii ṣe deede ati awọn oriṣi ohun elo adaṣe.
>> Awọn iwe-ẹri
>> Itanna paramita
| Motor Iwon | Foliteji/ Ipele (V) | Lọwọlọwọ/ Ipele (A) | Atako/ Ipele (Ω) | Inductance/ Ipele (mH) | Nọmba ti Awọn onirin asiwaju | Rotor Inertia (g.cm2) | Idaduro Torque (Nm) | Gigun mọto L (mm) |
| 60 | 2.1 | 5 | 0.42 | 1.3 | 4 | 340 | 1.5 | 55 |
| 60 | 2.9 | 5 | 0.57 | 1.98 | 4 | 590 | 2.5 | 75 |
| 60 | 3.2 | 5 | 0.64 | 2.3 | 4 | 690 | 3 | 84 |
| 60 | 3.7 | 5 | 0.74 | 2.83 | 4 | 850 | 3.5 | 100 |
| 60 | 4.1 | 5 | 0.81 | 3.23 | 4 | 960 | 4 | 112 |
>> Gbogbogbo imọ paramita
| radial kiliaransi | O pọju 0.02mm (ẹrù 450g) | Idaabobo idabobo | 100MΩ @ 500VDC |
| Imukuro axial | O pọju 0.08mm (ẹrù 450g) | Dielectric agbara | 500VAC, 1mA, 1s @ 1KHZ |
| Max radial fifuye | 70N (20mm lati ilẹ flange) | kilasi idabobo | Kilasi B (80K) |
| Iwọn axial ti o pọju | 15N | Ibaramu otutu | -20 ℃ ~ +50 ℃ |
>> 60HS2XX-X-4A iyaworan ilana ilana mọto
>> Torque-igbohunsafẹfẹ ti tẹ
Ipo idanwo:
Chopper wakọ, idaji micro-stepping, wakọ foliteji 40V